Home | Contact Us | Internet & Advertising Services
The suEXEC feature -- introduced in Apache 1.2 -- provides Apache users the ability to run CGI and SSI programs under user IDs different from the user ID of the calling web-server. Normally, when a CGI or SSI program executes, it runs as the same user who is running the web server.
Used properly, this feature can reduce considerably the security risks involved with allowing users to develop and run private CGI or SSI programs. However, if suEXEC is improperly configured, it can cause any number of problems and possibly create new holes in your computer's security. If you aren't familiar with managing setuid root programs and the security issues they present, we highly recommend that you not consider using suEXEC.
BACK TO CONTENTS
Before jumping head-first into this document, you should be aware of the assumptions made on the part of the Apache Group and this document.
First, it is assumed that you are using a UNIX derivate operating system that is capable of setuid and setgid operations. All command examples are given in this regard. Other platforms, if they are capable of supporting suEXEC, may differ in their configuration.
Second, it is assumed you are familiar with some basic concepts of your computer's security and its administration. This involves an understanding of setuid/setgid operations and the various effects they may have on your system and its level of security.
Third, it is assumed that you are using an unmodified version of suEXEC code. All code for suEXEC has been carefully scrutinized and tested by the developers as well as numerous beta testers. Every precaution has been taken to ensure a simple yet solidly safe base of code. Altering this code can cause unexpected problems and new security risks. It is highly recommended you not alter the suEXEC code unless you are well versed in the particulars of security programming and are willing to share your work with the Apache Group for consideration.
Fourth, and last, it has been the decision of the Apache Group to NOT make suEXEC part of the default installation of Apache. To this end, suEXEC configuration is a manual process requiring of the administrator careful attention to details. It is through this process that the Apache Group hopes to limit suEXEC installation only to those who are determined to use it.
Still with us? Yes? Good. Let's move on!
BACK TO CONTENTS
Before we begin configuring and installing suEXEC, we will first discuss the security model you are about to implement. By doing so, you may better understand what exactly is going on inside suEXEC and what precautions are taken to ensure your system's security.
suEXEC is based on a setuid "wrapper" program that is called by the main Apache web server. This wrapper is called when an HTTP request is made for a CGI or SSI program that the administrator has designated to run as a userid other than that of the main server. When such a request is made, Apache provides the suEXEC wrapper with the program's name and the user and group IDs under which the program is to execute.
The wrapper then employs the following process to determine success or failure -- if any one of these conditions fail, the program logs the failure and exits with an error, otherwise it will continue:
The wrapper will only execute if it is given the proper number of arguments. The proper argument format is known to the Apache web server. If the wrapper is not receiving the proper number of arguments, it is either being hacked, or there is something wrong with the suEXEC portion of your Apache binary.
This is to ensure that the user executing the wrapper is truly a user of the system.
Is this user the user allowed to run this wrapper? Only one user (the Apache user) is allowed to execute this program.
Does the target program contain a leading '/' or have a '..' backreference? These are not allowed; the target program must reside within the Apache webspace.
Does the target user exist?
Does the target group exist?
Presently, suEXEC does not allow 'root' to execute CGI/SSI programs.
The minimum user ID number is specified during configuration. This allows you to set the lowest possible userid that will be allowed to execute CGI/SSI programs. This is useful to block out "system" accounts.
Presently, suEXEC does not allow the 'root' group to execute CGI/SSI programs.
The minimum group ID number is specified during configuration. This allows you to set the lowest possible groupid that will be allowed to execute CGI/SSI programs. This is useful to block out "system" groups.
Here is where the program becomes the target user and group via setuid and setgid calls. The group access list is also initialized with all of the groups of which the user is a member.
If it doesn't exist, it can't very well contain files.
If the request is for a regular portion of the server, is the requested directory within the server's document root? If the request is for a UserDir, is the requested directory within the user's document root?
We don't want to open up the directory to others; only the owner user may be able to alter this directories contents.
If it doesn't exists, it can't very well be executed.
We don't want to give anyone other than the owner the ability to change the program.
We do not want to execute programs that will then change our UID/GID again.
Is the user the owner of the file?
suEXEC cleans the process' environment by establishing a safe execution PATH (defined during configuration), as well as only passing through those variables whose names are listed in the safe environment list (also created during configuration).
Here is where suEXEC ends and the target program begins.
This is the standard operation of the the suEXEC wrapper's security model. It is somewhat stringent and can impose new limitations and guidelines for CGI/SSI design, but it was developed carefully step-by-step with security in mind.
For more information as to how this security model can limit your possibilities in regards to server configuration, as well as what security risks can be avoided with a proper suEXEC setup, see the "Beware the Jabberwock" section of this document.
BACK TO CONTENTS
Here's where we begin the fun. The configuration and installation of suEXEC is a four step process: edit the suEXEC header file, compile suEXEC, place the suEXEC binary in its proper location, and configure Apache for use with suEXEC.
EDITING THE SUEXEC HEADER FILE
- From the top-level of the Apache source tree, type:
cd support [ENTER]
suexec.h file and change the following macros to
match your local Apache installation.
/* * HTTPD_USER -- Define as the username under which Apache normally * runs. This is the only user allowed to execute * this program. */ #define HTTPD_USER "www" /* * UID_MIN -- Define this as the lowest UID allowed to be a target user * for suEXEC. For most systems, 500 or 100 is common. */ #define UID_MIN 100 /* * GID_MIN -- Define this as the lowest GID allowed to be a target group * for suEXEC. For most systems, 100 is common. */ #define GID_MIN 100 /* * USERDIR_SUFFIX -- Define to be the subdirectory under users' * home directories where suEXEC access should * be allowed. All executables under this directory * will be executable by suEXEC as the user so * they should be "safe" programs. If you are * using a "simple" UserDir directive (ie. one * without a "*" in it) this should be set to * the same value. suEXEC will not work properly * in cases where the UserDir directive points to * a location that is not the same as the user's * home directory as referenced in the passwd file. * * If you have VirtualHosts with a different * UserDir for each, you will need to define them to * all reside in one parent directory; then name that * parent directory here. IF THIS IS NOT DEFINED * PROPERLY, ~USERDIR CGI REQUESTS WILL NOT WORK! * See the suEXEC documentation for more detailed * information. */ #define USERDIR_SUFFIX "public_html" /* * LOG_EXEC -- Define this as a filename if you want all suEXEC * transactions and errors logged for auditing and * debugging purposes. */ #define LOG_EXEC "/usr/local/etc/httpd/logs/cgi.log" /* Need me? */ /* * DOC_ROOT -- Define as the DocumentRoot set for Apache. This * will be the only hierarchy (aside from UserDirs) * that can be used for suEXEC behavior. */ #define DOC_ROOT "/usr/local/etc/httpd/htdocs" /* * SAFE_PATH -- Define a safe PATH environment to pass to CGI executables. * */ #define SAFE_PATH "/usr/local/bin:/usr/bin:/bin"
COMPILING THE SUEXEC WRAPPER
You now need to compile the suEXEC wrapper. At the shell command prompt, type:
cc suexec.c -o suexec [ENTER].
This should create the suexec wrapper executable.
COMPILING APACHE FOR USE WITH SUEXEC
By default, Apache is compiled to look for the suEXEC wrapper in the following location.
/* The path to the suEXEC wrapper */ #define SUEXEC_BIN "/usr/local/etc/httpd/sbin/suexec"
If your installation requires location of the wrapper program in a different directory, edit src/httpd.h and recompile your Apache server. See Compiling and Installing Apache for more info on this process.
COPYING THE SUEXEC BINARY TO ITS PROPER LOCATION
Copy the suexec executable created in the exercise above to the defined location for SUEXEC_BIN.
cp suexec /usr/local/etc/httpd/sbin/suexec [ENTER]
In order for the wrapper to set the user ID, it must me installed as owner root and must have the setuserid execution bit set for file modes. If you are not running a root user shell, do so now and execute the following commands.
chown root /usr/local/etc/httpd/sbin/suexec [ENTER]
chmod 4711 /usr/local/etc/httpd/sbin/suexec [ENTER]
BACK TO CONTENTS
After properly installing the suexec wrapper
executable, you must kill and restart the Apache server. A simple
kill -1 `cat httpd.pid` will not be enough.
Upon startup of the web-server, if Apache finds a properly configured
suexec wrapper, it will print the following message to
Configuring Apache for use with suexec wrapper.
If you don't see this message at server startup, the server is most likely not finding the wrapper program where it expects it, or the executable is not installed setuid root. Check your installation and try again.
One way to use suEXEC is through the User and Group directives in VirtualHost definitions. By setting these directives to values different from the main server user ID, all requests for CGI resources will be executed as the User and Group defined for that <VirtualHost>. If only one or neither of these directives are specified for a <VirtualHost> then the main server userid is assumed.
suEXEC can also be used to to execute CGI programs as the user to which the request is being directed. This is accomplished by using the ~ character prefixing the user ID for whom execution is desired. The only requirement needed for this feature to work is for CGI execution to be enabled for the user and that the script must meet the scrutiny of the security checks above.
BACK TO CONTENTS
The suEXEC wrapper will write log information to the location defined in
suexec.h as indicated above. If you feel you have
configured and installed the wrapper properly, have a look at this log
and the error_log for the server to see where you may have gone astray.
BACK TO CONTENTS
NOTE! This section may not be complete. For the latest revision of this section of the documentation, see the Apache Group's Online Documentation version.
There are a few points of interest regarding the wrapper that can cause limitations on server setup. Please review these before submitting any "bugs" regarding suEXEC.
For security and efficiency reasons, all suexec requests must remain within either a top-level document root for virtual host requests, or one top-level personal document root for userdir requests. For example, if you have four VirtualHosts configured, you would need to structure all of your VHosts' document roots off of one main Apache document hierarchy to take advantage of suEXEC for VirtualHosts. (Example forthcoming.)
This can be a dangerous thing to change. Make certain every path you include in this define is a trusted directory. You don't want to open people up to having someone from across the world running a trojan horse on them.
Again, this can cause Big Trouble if you try this without knowing what you are doing. Stay away from it if at all possible.
BACK TO CONTENTS